Product keywords: low viscosity | high Tg | high purity | good stability | high reactivity | good wetting | high-temperature resistance | low shrinkage
1. Introduction
With the rapid development of aerospace, electrical and electronic engineering and new-energy equipment, composites and electrical casting products are placing higher demands on the heat-resistance class and process compatibility of resin matrices. Donghua Material Science's DE510, a trifunctional glycidyl amine high-temperature epoxy resin, is a reliable raw-material solution for advanced composites and electrical insulation.

DE510 (full name: triglycidyl p-aminophenol, CAS No. 5026-74-4) is a trifunctional, low-viscosity epoxy resin. Anhydrides and amines can be used as curing agents. It is mainly suitable for composites, electrical casting, adhesives and other fields.
2. Basic parameters
| Property | Value | Unit | Test method |
|---|---|---|---|
| Appearance | Yellow liquid | — | Visual |
| Viscosity (25 °C) | 400.0–850.0 | mPa·s | BS EN ISO 3219:1995 |
| Epoxy equivalent | 93.0–106.0 | g/mol | GB/T 4612-2008 |
| Epoxy value | 0.94–1.07 | mol/100 g | DH/T-QC-021-A0 |
| Total chlorine | ≤ 5,000 | mg/kg | DH/T-QC-004-A0 |
| Volatile matter | ≤ 1.0 | % | DH/T-QC-006-A0 |
Product features: high purity, low viscosity and high stability; excellent mechanical properties; excellent heat resistance; excellent solvent and corrosion resistance.
3. Properties of the cured product (DDS system)
| Property | DE510 |
|---|---|
| Tg (DMA, °C) | 260–270 |
| Flexural strength (MPa) | 136 |
| Flexural modulus (GPa) | 3.4 |
| Tensile strength (MPa) | 70 |
| Tensile modulus (GPa) | 3.6 |
| Elongation at break (%) | 2.8 |
Storage: keep in a cool, dry place, preferably below 25 °C. Keep sealed and protect from moisture, from contamination by acidic or alkaline substances, from direct sunlight and from any form of heat source. Shelf life is two years from the date of manufacture; beyond two years, evaluate performance before use.
4. Typical application areas
Carbon-fibre / glass-fibre composites
Suitable for pultrusion, filament winding and prepreg processes, used in aerospace structural parts and high-temperature products such as high-pressure gas cylinders.
Electrical casting insulation
Used with APG (automatic pressure gelation) and vacuum casting processes for electrical casting insulation products with high heat-resistance class requirements and for casting encapsulation of micro-motor components.
High-temperature structural adhesives
Cured with aromatic amines or anhydrides, it meets structural bonding and component fixing requirements at temperatures above 200 °C.
RTM / VARTM vacuum infusion
Ultra-low viscosity makes it suitable for resin transfer moulding and vacuum-assisted infusion of large components, with good wetting and handling.
High-temperature epoxy diluent and modifier
Added to other epoxy systems it significantly reduces viscosity and improves heat resistance — an ideal choice for cost-effective formulation upgrades.
Donghua Material Science's DE510 resolves several material pain points in advanced composites and electrical casting — heat-resistance class, processability and long-term reliability are no longer a trade-off — providing the high-end equipment manufacturing value chain with a stable, reliable domestic raw-material option.
