Low Viscosity, High Heat Resistance, Carbon-Fibre Wetting: Donghua Multifunctional Epoxy Resin
Published on: 2026-09-21

Product keywords: low viscosity | high Tg | high toughness | excellent adhesion | excellent carbon-fibre wetting | good stability

1. Introduction

DE186 (full name: 4,5-epoxycyclohexane-1,2-dicarboxylic acid diglycidyl ester, CAS No. 25293-64-5) is a trifunctional, low-viscosity epoxy resin whose molecular structure contains both cycloaliphatic epoxy groups and glycidyl ester groups. This structural design gives it both the heat resistance and weatherability of cycloaliphatic epoxy resins and the high reactivity and excellent adhesion of glycidyl ester epoxies. Because of the glycidyl ester groups, DE186 is more reactive than ordinary cycloaliphatic epoxy resins and can be used with a wide range of curing agents including anhydrides and amines. DE186 also wets carbon fibre exceptionally well, making it an ideal matrix resin for carbon-fibre composites such as high-pressure gas cylinders and motor rotors. It has broad application prospects in adhesives, high-pressure gas cylinders, motor rotors and other carbon-fibre composite fields.

Product features:

  • Low viscosity and good miscibility with curing agents
  • Excellent carbon-fibre wetting
  • Good stability
  • Excellent adhesion
  • High Tg and high toughness

2. Molecular structure

A cyclohexane ring carrying an epoxy group together with two glycidyl ester arms — combining a cycloaliphatic epoxy group and glycidyl ester groups in one molecule.

3. Basic parameters

PropertyValueUnitTest method
AppearancePale yellow viscous liquid—Visual
Viscosity (25 °C)2,000.0–3,500.0mPa·sBS EN ISO 3219:1995
Epoxy equivalent100.0–110.0g/molGB/T 4612-2008
Colour (Pt-Co)≤ 100HazenGB/T 3143-1982
Volatile matter≤ 0.5%DH/T-QC-006

Thanks to the high reactivity of the glycidyl ester groups, DE186 cures fast and bonds strongly; the cycloaliphatic structure contributes excellent weatherability, electrical insulation and heat resistance.

4. Properties of the cured product

The properties of DE186 cured with different curing agents are as follows: with DDS, the heat deflection temperature (HDT) reaches 210–220 °C, showing excellent heat resistance; the DDM system gives higher compressive strength and tensile modulus.

PropertyDDS systemDDM system
Heat deflection temperature HDT (°C)210–220195–205
Coefficient of linear expansion (10⁻⁵ K⁻¹)4.954.44
Flexural strength (MPa)133113
Compressive strength (MPa)194203
Tensile strength (MPa)7572
Tensile modulus (GPa)4.14.3
Elongation at break (%)2.31.6

5. Typical application areas

High-performance carbon-fibre / glass-fibre composites

Thanks to excellent carbon-fibre wetting, it is used in filament-wound products such as high-pressure gas cylinders and motor rotors, providing high strength, high elastic modulus and excellent heat resistance.

High-temperature structural adhesives

Using its high Tg and excellent adhesion, it is suitable for structural bonding under high-temperature conditions, meeting requirements for bond strength, heat resistance and ageing resistance.

Electrical insulation materials

Anhydride-cured systems offer excellent electrical insulation and low shrinkage, suitable for casting compounds, encapsulating compounds and other electrical insulation applications.

High-temperature coatings and solvent-free varnishes

Low viscosity makes application easy and weatherability is good, so it can be used in high-temperature coatings and solvent-free varnish systems.

High-temperature epoxy diluent

It can be used as a reactive diluent for other epoxy systems, improving processing performance.

Donghua Material Science's multifunctional epoxy resins provide a preferred domestic option for carbon-fibre composites, electrical casting and high-temperature adhesives.