On 14 August, Donghua Material Science presented the technical report “Iteration of Cationic Curing Technology and Innovative Application Scenarios” at the 27th RadTech China Annual Conference, exploring the innovation path of low-VOC photocuring technology together with industry colleagues.

As domestic policies such as the VOC environmental protection tax continue to be implemented, greening and high performance have become the core themes of the photocuring industry's transformation. With low volume shrinkage, no oxygen inhibition, continued reaction through the dark reaction, excellent substrate adhesion and low small-molecule migration, cationic photocuring has become a highly promising technical route for coatings, inks and electronic packaging.
Yantai Donghua New Materials has long focused on R&D of cationic curing raw materials. Its core product, the cycloaliphatic epoxy resin DE021E, offers fast curing, low halogen content, low viscosity, high heat resistance, high weatherability and high insulation, with outstanding weather and yellowing resistance — it is the mainstream resin for cationic formulations. The company's range of modified cycloaliphatic epoxy resins can also be adapted to different application methods and performance targets. In addition, the company supplies oxetane reactive diluents and DR321 / DR323 cycloaliphatic specialty acrylates. These specialty acrylate molecules carry both epoxy and acrylate functional groups, making them compatible with cationic–free-radical dual-curing systems; the cured films have high gloss, excellent ageing and chemical resistance, and are compatible with a variety of processing methods.
Donghua Material Science does not only supply high-quality resins — it also provides formulation references and customised solutions, helping downstream companies complete the green iteration of their products.
Free-radical vs. cationic photocuring
| Property | Free-radical photocuring | Cationic photocuring |
|---|---|---|
| Raw materials | (Meth)acrylate resins, unsaturated resins, vinyl monomers, etc. | Epoxy resins, vinyl ether resins, oxetane monomers |
| Active intermediate | Free radicals | Cations |
| Initiator type | Free-radical initiators such as TPO, 184 | Cationic photoinitiators such as 6992, 6976 |
| Curing speed | Fast | Relatively slow |
| Dark reaction | No | Yes |
| Volume shrinkage | High (7–15%) | Low (1–4%) |
| Oxygen inhibition | Severe | None |
| Moisture sensitivity | None | Strong |
| Alkali sensitivity | None | Strong |
| Migration | Severe | Low |
Characteristics of cationic photocuring: low shrinkage, controllable within 1–4%; ring-opening polymerisation is not inhibited by oxygen, so there is no oxygen inhibition; the dark reaction gives high conversion, low migration and high safety; excellent adhesion, especially to metals, glass and plastics such as PET and PC; a wide viscosity-adjustment range with flexible process options (spraying, roller coating, screen printing, etc.).
DE021E — the highest-volume base resin in cationic photocuring systems
Basic physical properties
(1) Contains a cycloaliphatic structure — the cycloaliphatic backbone sits directly inside the epoxy resin as a group structure. On electrical breakdown it decomposes into carbon dioxide and water rather than forming carbon and causing short circuits, as aromatic resins do when heated or burned.
(2) Curing behaviour — ring-opening polymerisation in the presence of a cationic catalyst; particularly under a strong-acid composite catalysis environment, it cures rapidly by heat or UV. It cures readily with anhydride and phenol curing agents under heat, and shows low reactivity with amine curing agents.
(3) Properties of the cured product — excellent heat resistance (resistance to high-temperature deformation); excellent weatherability; excellent mechanical strength at high temperature; excellent colour and transparency; excellent electrical insulation, arc resistance and tracking resistance.
DE021E typical properties
| Item | Typical value |
|---|---|
| Appearance | Colourless transparent liquid |
| Epoxy equivalent | 126–132 g/eq |
| Viscosity (25 °C) | 220–300 mPa·s |
| Total chlorine | < 50 ppm |
| Purity | > 97% |
| Colour (Pt-Co) | ≤ 15 |
Equivalent grades: Yantai Donghua DE021E; Nantong Xinaxi S-06E; Daicel 2021P; Dow ERL4221D; Union Carbide UVR6103.
Applications: adhesives (LED encapsulants, polariser film adhesives, optical adhesives); inks (flexographic inks for food outer packaging, character inkjet, screen printing inks); coatings (non-metallic coatings, glass primers and varnishes, plastic hardening liquids, metal coatings and varnishes, primers and white coatings); composites (wind blade repair, pipe repair, transparent composites); 3D printing (SLA), heat-deformation-resistant parts and precision resin tooling.
DR321 series — cycloaliphatic specialty acrylates
Basic characteristics: BPA-free, therefore highly safe; no benzene ring — the backbone is a cycloaliphatic structure with excellent yellowing resistance; acrylate end groups give high reactivity; high hydroxyl content gives good wetting and substrate adhesion; the cycloaliphatic backbone provides good chemical resistance.
Product performance: free-radical photocurable, with curing activity higher than that of urethane acrylates of the same functionality; can be used in thermal curing systems when a free-radical thermal initiator is added or a redox system is used; suitable for free-radical / cationic dual-curing systems. Cured film: low colour and high gloss; excellent ageing and yellowing resistance; good water, solvent and abrasion resistance; high light transmission and high mechanical strength when thermally cured.
| Item | DR321 | DR3215 | DR3214 |
|---|---|---|---|
| Diluent | — | 15% HDDA | 30% TPGDA |
| Appearance | Colourless to pale yellow liquid | Colourless to pale yellow liquid | Colourless to pale yellow liquid |
| Viscosity (mPa·s, 25 °C) | 2,000–4,500 | 4,500–6,500 @ 60 °C | 800–2,000 |
| Colour (Pt-Co) | ≤ 50 | ≤ 50 | ≤ 50 |
| Functionality (theoretical) | 2 | 2 | 2 |
DR323 — cycloaliphatic specialty acrylate
The structure contains both acrylate and epoxy groups, so it acts as a crosslinker. BPA-free and safe; no benzene ring — the backbone is a cycloaliphatic structure with excellent yellowing resistance. Its photocuring activity is far higher than that of glycidyl methacrylate (GMA), and it can be used as a crosslinker in free-radical / cationic dual-curing systems. Cured film: low colour and high gloss; excellent ageing and yellowing resistance.
| Item | DR323 |
|---|---|
| Appearance | Colourless to pale yellow liquid |
| Colour (Pt-Co) | ≤ 100 |
| Viscosity (mPa·s, 25 °C) | 500–1,000 |
| Epoxy equivalent | 325–355 g/eq |
| Total chlorine | ≤ 50 ppm |
| Functionality (theoretical) | 2 |
| Active content | 100% |
Oxetane reactive diluents
Basic characteristics: low viscosity and good flowability; strong diluting power; high reactivity. Applications: high reactivity; ring-opening polymerisation in the presence of a cationic catalyst; promotes the cationic curing of cycloaliphatic epoxy resins.
| Item | DE101 | DE221 | DE211 | DE212 |
|---|---|---|---|---|
| Appearance | Colourless transparent liquid | Colourless to pale yellow liquid | Colourless transparent liquid | Colourless transparent liquid |
| Colour (Pt-Co) | ≤ 50 | ≤ 40 | ≤ 50 | ≤ 50 |
| Viscosity (25 °C) | < 25 mPa·s | < 25 mPa·s | < 25 mPa·s | < 25 mPa·s |
| Purity | > 98% | > 98% | > 97% | > 97% |
| Diluent characteristics | Strong diluting power and adhesion; promotes UV curing; simple structure | Bifunctional; strong diluting power, low shrinkage, fast curing, good hardness | Strong diluting power and adhesion; promotes UV curing; excellent weatherability; excellent colour and transparency | Strong diluting power and adhesion; promotes UV curing; low shrinkage and excellent adhesion |
Product list
Cycloaliphatic epoxy resins: DE021E, DE184, DE710, DE810, S-28. Cycloaliphatic specialty acrylates: DR321, DR323. Reactive diluents: DE101, DE221, DE211, DE212.
Modified cycloaliphatic epoxy resins — recommended grades
Toughening resins for UV tinplate varnishes
| Recommended resin | Characteristics |
|---|---|
| DE1601 | Good toughness, high bond strength |
| DE1701 | Tackifying modification |
| DE1211 | Medium viscosity; fast cationic curing |
| DE1214 | Medium viscosity; fast curing |
| DE121 | High viscosity; fast cationic curing |
| DE8049 | Low viscosity; combines toughness and curing speed; good adhesion |
| DEJ5230 | Low viscosity; high toughness |
| DEJ5233 | Low viscosity; good toughness (lower than DE5230) |
| DE5199 | Combines toughness and curing speed; good adhesion |
Cationic photoinitiators: UVI-6992, UVI-6976, DH301. Cationic sensitisers: DH3510, DH3306. Thermal initiators: DH080, DH081, DH091. Applications: coatings, adhesives, electronic packaging, inks.
Key application areas: tinplate varnishes (energy saving, emission reduction, food safety); cationic inks (low migration, excellent adhesion); plastic varnishes (low shrinkage, high hardness, retort resistance); glass varnishes (retort resistance, alkali resistance, water-soak resistance); UV adhesives (low shrinkage, yellowing resistance, high adhesion).
