High-temperature-resistant epoxy compound systems are mainly used in the manufacture of high-end composite parts, replacing conventional metal components. They offer high strength, high-temperature resistance, light weight, reusability and low cost.
Donghua's cycloaliphatic epoxy resin DE021E has a special cycloaliphatic structure: its Tg when cured with anhydrides can reach 208 °C, and its room-temperature viscosity of 220–300 cP makes it particularly suitable for pultrusion and filament-winding processes.
Effect of different DE021E addition ratios on the Tg and viscosity of a conventional epoxy system
| DE021E addition ratio | Resin viscosity (cP) | Viscosity reduction | Tg (°C, DSC) | Tg increase |
|---|---|---|---|---|
| 0% | 13,860 | — | 129 | 0% |
| 10% | 8,882 | 36% | 142 | 10% |
| 30% | 2,982 | 78% | 153 | 19% |
| 40% | 2,156 | 84% | 159 | 23% |
| 50% | 1,648 | 88% | 166 | 29% |
| 70% | 650 | 95% | 172 | 33% |
| 80% | 478 | 97% | 178 | 38% |
| 100% | 235 | — | 208 | — |
Based on these characteristics, Donghua Material Science has worked with customers in the composite field to develop a range of high-temperature-resistant formulation solutions suitable for pultrusion, filament winding, VARIM and RTM processes. The R&D results are shared with industry colleagues below.
High-temperature epoxy compound systems
| Grade | DE4067 | DE4068 | DE4069 | DE4070 |
|---|---|---|---|---|
| Tg (DMA, °C) | 180 | — | 220* | 266 |
| Tg (DSC, °C) | 189 | 231 | 255 | 279 |
| Part A viscosity (25 °C, cP) | 3,605 | 3,605 | 5,400 | 5,400 |
| Part B viscosity (25 °C, cP) | 125 | 135 | 150 | 155 |
| Mixed viscosity (25 °C, cP) | 532 | 540 | 735 | 668 |
| Pot life (25 °C, h) | 5 | 5 | > 24 | > 24 |
| Gel time (150 °C) | 13'20" | — | 14'45" | 52' |
| Tensile strength / modulus / elongation | 70 MPa / 3,000 MPa / 2.82% | 68 MPa / 3,032 MPa / 2.57% | 79.1 MPa / 3,300 MPa / 2.80% | See note |
| Flexural strength / modulus | 132 MPa / 2,900 MPa | 119 MPa / 3,030 MPa | 117 MPa / 3,190 MPa | See note |
Several cells of the original infographic are partly obscured. Cells marked — could not be read; the DE4069 DMA value is printed as 220 in this article, whereas the later 16 October article prints 251 for the same grade — both are reproduced as printed in their respective sources. All figures are as published by Donghua; confirm the current datasheet before formulation work.
The high-temperature-resistant epoxy compound systems described in this article are widely used in structural parts such as wind turbine blade root fairings (shells) and new-energy vehicle drive shafts.
If you are looking for a high-temperature composite solution that is high-strength, heat-resistant, lightweight, reusable and low-cost, please contact our sales and technical team.
