Low Halogen, Low Viscosity: The Golden Combination of Electronic-Grade Epoxy Materials
Published on: 2026-05-15

In high-end electronic packaging, PCB protection, LED potting and similar applications, the pursuit of higher performance inevitably means stricter material selection. Among the many technical parameters, halogen content and viscosity are two of the most closely watched. The cycloaliphatic epoxy resin DE021E delivers the golden combination of low halogen plus low viscosity.

Low halogen: the first choice for green electronics

In the production of bisphenol-A epoxy resins, the epichlorohydrin process inevitably leaves hydrolysable or bound chlorine in the molecular chain, with total chlorine typically above 2,000 ppm. Even refined “low-halogen” grades can only bring this down to several hundred or a thousand ppm. For high-end applications such as electronic packaging and PCB inks, these residual halogens directly threaten the long-term reliability of electronic components.

Donghua Material Science uses an olefin oxidation route in which the molecular structure contains no halogen source at all, solving the problem of halogen residue at the root. It readily meets the environmental requirements of high-end fields such as electronic packaging and PCBs.

Low viscosity: the universal thinner of formulation design

DE021E has a viscosity of only 220–300 mPa·s at 25 °C. Compared with conventional bisphenol-A 128 epoxy resin (12,000–14,000 mPa·s), its flow is more than 50 times higher. This ultra-low viscosity brings several process advantages: strong penetration, an obvious thinning effect, good air release and excellent atomisation in spray coatings, enabling solvent-free formulations, high filler loadings and low energy consumption on the production line.

  • UV adhesives: solvent-free, low viscosity;
  • Electronic potting compounds: good flow, easy air release;
  • Encapsulants: strong penetration;
  • Spray coatings and inks: excellent atomisation.

Starting from your existing formulation, viscosity can be reduced without sacrificing heat resistance or mechanical performance, giving a rich set of choices matched to your process.

If you are looking for an electronic-grade, high-performance epoxy material with ultra-low halogen content and viscosity reduction without property loss, DE021E is your best choice.