As environmental regulations tighten and customers demand ever better print quality, conventional ink systems are running into a mid-life crisis. In the pursuit of greener, safer and higher-quality printing, 100% solids UV flexographic inks are becoming the new favourite of the industry, and within this technical shift, cycloaliphatic epoxy resins are quietly leading a fundamental change from free-radical to cationic chemistry.
Most UV inks on the market today use free-radical curing. They are greener than solvent-based inks, but the headaches on the shop floor have never gone away:

Industry pain points: three hard flaws of conventional UV inks
- Oxygen inhibition. Oxygen in the air “consumes” free radicals, leaving the ink surface tacky and under-cured, which causes blocking on the rewind roll and rejected print. To overcome it, companies have to add nitrogen inerting equipment, which pushes up operating costs substantially.
- High volume shrinkage. Free-radical systems typically shrink by more than 10% during cure, generating internal stress on plastic films and metal foil; the result is poor adhesion and a high risk of delamination, which in turn forces the use of primer.
- Odour and safety concerns. Residual monomers and photoinitiator fragments not only smell strong but are skin sensitisers. Want food-packaging orders? Migration testing stops you at the door.
The technical breakthrough: the decisive advantage of cationic curing
Cationic curing technology built around cycloaliphatic epoxy resins removes the landmines of free-radical systems at the level of first principles.
- Immune to oxygen inhibition: cationic polymerisation is a ring-opening reaction catalysed by a superacid and is completely insensitive to oxygen. The ink surface dries tack-free without nitrogen inerting, so blocking and rejects disappear.
- Very low shrinkage: as the epoxy ring opens, the molecular structure relaxes, and curing shrinkage is typically below 2%. This stress-release effect allows strong adhesion without primer even on difficult substrates such as PE, BOPP and metal foil.
- “Dark cure”: cationic polymerisation is a living polymerisation: once triggered by light, the superacid remains as a catalyst and the reaction continues for tens of hours after the light source is removed, with a theoretical conversion of 100%. Thick coatings and high-density black inks, traditionally difficult, become straightforward.
- Low odour, high safety: cycloaliphatic epoxy resins contain no bisphenol A (BPA) and carry no reproductive toxicity risk. High conversion also ensures that very little low-molecular-weight residue can migrate, fully satisfying the strict compliance requirements of food and pharmaceutical packaging.

Efficiency gains: ultimate line speed
Production efficiency is the key driver of revenue: a higher printing line speed shortens the production time of each batch, frees up capacity and lowers the overall cost of every order.
Compared with conventional solvent-based gravure inks and UV flexo free-radical inks, UV flexo cationic inks can run at higher line speeds while maintaining print quality.
- Solvent-based gravure, rigid substrates: about 500 m/min.
- Solvent-based gravure, flexible films: about 200 m/min.
- UV flexo, satellite film press (cationic): 600 m/min.
- UV flexo, satellite film press (free-radical): 200 m/min.
- UV flexo, in-line press (cationic): 200 m/min.
Crossing the threshold: the high-margin orders only this chemistry can win
This is the entry ticket to higher-value markets.
Total cost: don’t look at unit price alone — do the whole sum and win the future
- Less equipment: no nitrogen system and no post-drying required.
- Less energy: LED cold light sources cut electricity bills by half.
- Fewer rejects: zero oxygen inhibition and very low shrinkage dramatically reduce scrap rates.
- Lower opportunity cost: winning food and pharmaceutical orders doubles margins.
The “expensive” raw material is often the cheapest choice in the end.
The future is already here: technical progress meets a favourable tide
The printing industry is moving from mercury lamps to UV-LED cold light sources, and cationic systems are a match made in heaven with LED. Under a cold light source, oxygen inhibition is even more severe for free-radical systems, whereas cationic systems are entirely unaffected: they cure efficiently at 395 nm, the film does not get hot and ozone generation is zero. None of this means UV cationic inks have no technical threshold, but as formulations have been developed in depth and raw materials upgraded, the problems once faced now have mature solutions.

As VOC regulations tighten and food-contact material supervision is upgraded, a shake-out in the printing industry is unavoidable. Cycloaliphatic epoxy resins are not an option but a necessity for high-end green packaging. Rather than competing on price in the low-end market, use technology to open up blue ocean.
You are welcome to contact our technical and sales teams to discuss the best solution for your UV flexographic inks.
