DE184 Cycloaliphatic Epoxy Resin: Superior Insulation Performance for Upgraded Electronics
Published on: 2026-07-31

Product keywords: low viscosity | high flowability | good high-temperature insulation | good thermal stability | good UV and arc resistance | thermally curable

1. Introduction

DE184 (full name: diglycidyl hexahydrophthalate, CAS No. 5493-45-8) is a low-viscosity base resin. Anhydrides, amines and thermal cationic initiators can be used as curing agents. It is mainly used in LED packaging, insulating potting, mould casting, adhesives, composite materials and coatings.

Product features:

  • Good UV resistance and arc resistance
  • Good thermal stability
  • Low viscosity and good flowability
  • Good high-temperature insulation
  • Thermally curable
  • Fast curing and low curing shrinkage

2. Molecular structure

A cycloaliphatic diglycidyl ester: a cyclohexane ring bearing two glycidyl ester groups — the source of the resin's low viscosity, UV stability and arc resistance.

3. Basic parameters

PropertyValueUnitTest method
AppearanceColourless to pale yellow liquid—Visual
Viscosity (25 °C)500.0–1,000.0mPa·sGB/T 22314-2008
Epoxy equivalent150.0–180.0g/molGB/T 4612-2008
Colour (Pt-Co)≤ 50HazenGB/T 3143-1982

4. Application performance testing

Mechanical properties of the cured product

PropertyDE184
Tg (°C, DSC)129
Tensile strength (MPa)64.69
Tensile modulus (MPa)2,839.6
Elongation at break (%)2.4
Flexural strength (MPa)142.95
Flexural modulus (MPa)3,291.84
Deflection (mm)12.26

Curing schedule: 80 °C / 4 h + 120 °C / 2 h + 130 °C / 8 h; curing agent: MeHHPA + 1% BDMA. Gel test standard: GB/T 1995-1997. Mechanical test standard: GB/T 2567-2008.

Electrical properties of the cured product

PropertyResultUnit
Surface resistivity2.29 × 10¹⁵Ω
Volume resistivity3.19 × 10¹⁵Ω·cm
Dielectric constant3.127—
Dielectric loss0.342%
Comparative tracking index (CTI), 600 VPass—
Dielectric breakdown strength29.4 / 33.5 / 33.3kV/mm

(1) Dielectric constant and dielectric loss: high-precision high-voltage capacitance bridge (50 Hz); 1 mm thick, 100 mm × 100 mm. (2) Surface and volume resistivity: resistance tester; 1 mm thick, 100 mm × 100 mm. (3) Breakdown strength: dielectric strength tester; 1 mm thick, 100 mm × 100 mm. (4) CTI: tracking tester; 3 mm thick, 100 mm × 100 mm; 600 V.

5. Recommended application scenarios

(1) Electrical insulation materials

For high-performance electrical insulation systems, meeting the requirements of electronic components and power equipment for insulation performance, heat resistance and long-term reliability.

(2) Electronic packaging materials

Thanks to good mechanical properties, low shrinkage and excellent weatherability, it can be used in electronic packaging to improve device stability and service life.

(3) Composite insulation materials

Suitable for glass-fibre-reinforced composites, insulating structural parts and similar applications, providing good mechanical strength, temperature resistance and dimensional stability.

(4) High-performance adhesives

For structural bonding in electronics and electrical engineering, meeting requirements for bond strength, heat resistance and ageing resistance.

If you are interested in this product, you are welcome to contact our sales and technical team.