Donghua Material Science at the 29th China Composites Expo: Specialty Epoxy Resins Drive Upgrades
Published on: 2026-09-01

On September 1, the 29th China International Composites Industrial Technology Exposition opened at the National Exhibition and Convention Center (Shanghai). Donghua Material Science presented its cycloaliphatic epoxy resin product series and composite material solutions at Booth 8Y35, showcasing its innovative achievements in high-performance resin materials and green curing technology.

At this expo, Donghua Material Science presented three core product series in a concentrated display, complemented by free-radical and cationic photoinitiators as well as thermal initiators, providing customers with systematic solutions.

1. Cycloaliphatic epoxy resins — DE021E / DE021C / DE021D / S-28

Yellowing resistant; Tg up to 208 °C; compatible with UV curing, thermal cationic curing and anhydride thermal curing.

ItemDE021E / S-06ES-28
AppearanceColourless transparent liquidColourless to light yellow liquid
CAS No.2386-87-03130-19-6
Epoxy equivalent weight (g/mol)126–132190–210
Viscosity (mPa·s, 25 °C)220–250400–750
Colour (Pt-Co)0–50≤ 100

DE021E: excellent yellowing resistance; high Tg up to 208 °C; UV curing, thermal cationic curing and anhydride thermal curing; high electrical insulation; low halogen; UV resistant. S-28: high toughness; photocurable; can be thermally cured with anhydrides.

Applications: PV module frames, transparent composites, high-Tg pultrusion / filament-winding products, white-spot-free prepregs.

2. Glycidyl ester resins — DE182 / DE184 / DE186

Low viscosity, good flowability, and excellent high-temperature electrical insulation.

ItemDE182DE184DE186
AppearanceColourless to pale yellow liquidColourless to pale yellow liquidColourless to pale yellow viscous liquid
CAS No.21544-03-65493-45-825293-64-5
Epoxy equivalent weight (g/mol)140–170150–180100–110
Viscosity (mPa·s, 25 °C)300–800500–1,0002,000–3,500
Volatile matter (%)≤ 0.5≤ 0.5≤ 0.5

DE182 / DE184: low viscosity and good flowability; good thermal stability; excellent high-temperature electrical insulation; fast curing with low shrinkage; good UV and arc resistance; UV curing and thermal curing. DE186: good stability; high Tg and high toughness; excellent adhesion; low shrinkage; low viscosity with good compatibility with curing agents; good radiation stability.

Applications: high-pressure gas cylinders, motor rotors, high-temperature adhesives.

3. Glycidyl amine resins — DE510 / DE500M / DE721

Fast curing, outstanding mechanical properties and low shrinkage.

ItemDE510DE500MDE721
AppearanceYellow liquidYellow to reddish-brown viscous liquidBrown viscous liquid
CAS No.5026-74-471604-74-528768-32-3
Epoxy equivalent weight (g/mol)93–106105–115100–125
Viscosity (mPa·s)400–850 (25 °C)8,000–25,000 (25 °C)3,000–6,000 (50 °C)
Volatile matter (%)≤ 1.0≤ 1.5≤ 0.6

DE510: high purity, low viscosity; excellent mechanical properties; good heat resistance; high stability; good solvent and corrosion resistance. DE500M: fast curing; excellent solvent and corrosion resistance; excellent mechanical properties; excellent heat resistance. DE721: long-term high-temperature resistance; low shrinkage; good radiation stability; durable mechanical strength; excellent chemical resistance.

Applications: carbon fiber prepregs, aerospace composite materials, high-temperature adhesives.

4. Resin for weatherable, flame-retardant pultruded profiles (coating-free PV frames)

Coating-free PV frames use an intrinsically weatherable cycloaliphatic epoxy resin as the base resin, with excellent weatherability and corrosion resistance. No coating treatment is required, completely eliminating the delamination, corrosion and oxidation problems common to metal or coated composite solutions, and providing longer-lasting protection for PV plants. It is suitable for harsh environments such as coastal high-salt-fog areas, tidal flats, saline-alkali land and chemical industrial parks.

ItemStandardTypical value
Tensile strength (MPa) — resin castingGB/T 2567-200845–65
Tensile modulus (MPa) — resin castingGB/T 2567-20083,000–4,500
Elongation at break (%) — resin castingGB/T 2567-20082–3
Flexural strength (MPa) — resin castingGB/T 2567-200870–90
Flexural modulus (MPa) — resin castingGB/T 2567-20083,000–4,000
Impact strength (kJ/m²) — resin castingGB/T 2567-200810–20
Glass transition temperature, DSC (°C)IEC 61006—
Tensile strength T0 (MPa) — compositeISO 5271,400–1,600
Tensile modulus T0 (GPa) — compositeISO 52755–65
Tensile strain T0 (%) — compositeISO 5272.5–3.5
Flexural strength F0 (MPa) — compositeISO 141251,300–1,500
Flexural modulus F0 (GPa) — compositeISO 1412550–60
ILSS (MPa) — compositeISO 1413050–60
Mechanical retention after DH 1000 hIEC 61215-2:2016> 70%
Mechanical retention after UV 2000 hISO 4892-2> 80%

Upper rows are properties of the cured resin; lower rows are properties of the corresponding composite. A few values that are illegible in the original infographic are marked “—”.

Product features: no coating required, reducing initial investment; excellent UV-aging and damp-heat (85 °C/85% RH) aging resistance; excellent mechanical properties; excellent flame retardancy.

5. Resin for transparent composites

Transparent composites use (modified) cycloaliphatic epoxy resin / thermal cationic curing systems combined with glass fiber, with refractive indices optimally matched, enabling highly transparent composite products with excellent light transmittance and mechanical properties.

Product features: excellent transparency (light transmittance > 90%); low halogen content with excellent insulation; excellent mechanical properties (tensile strength > 300 MPa, flexural modulus > 20 GPa); outstanding weatherability (UV 300 kWh Δb ≤ 3; DH 1000 h Δb ≤ 2).

Applications: PV modules and front sheets, transparent PV front covers, transparent phone back covers, transparent copper-clad laminates.

6. UV repair resin for wind turbine blades

The UV repair resin features low viscosity, good processability, fast photocuring, high heat resistance, low curing shrinkage and strong adhesion. It is suitable for composite repair scenarios requiring rapid curing, high heat resistance and UV aging resistance.

Product features: fast photocuring speed and high efficiency; low mixed viscosity and good processability; no oxygen inhibition — deep curing is possible; high adhesion strength to substrates.

TemperatureTest itemResultSpecification
Room temperature (25 °C)Interlaminar shear (MPa)33.0> 30
Room temperature (25 °C)Tensile shear (MPa)13.7> 12
Room temperature (25 °C)Shore D, front (HD)88/
Room temperature (25 °C)Shore D, back (HD)91/
Low temperature (−18 °C)Interlaminar shear (MPa)32> 30
Low temperature (−18 °C)Tensile shear (MPa)13.5> 12
Low temperature (−18 °C)Shore D, front (HD)92> 90
Low temperature (−18 °C)Shore D, back (HD)91> 90
Tg (°C)Glass transition temperature89> 80

Data measured on articles produced with Donghua's solution. Test conditions: LED 365 nm, 600 mW/cm², 15 min irradiation; tensile shear specimens 4–5 mm, interlaminar shear specimens 6–7 mm.

7. Cycloaliphatic epoxy resins — high-temperature composite solutions

The cycloaliphatic epoxy resin DE021E has a special cycloaliphatic structure; when cured with anhydrides its Tg can reach 208 °C, and its room-temperature viscosity of 220–300 cP is especially suitable for pultrusion and filament-winding processes.

DE021E addition ratioResin viscosity (cP)Viscosity reductionTg (°C, DSC)Tg increase
0%13,860—1290%
10%8,88236%14210%
30%2,98278%15319%
40%2,15684%15923%
50%1,64888%16629%
70%65095%17233%
80%47897%17838%
100%235—208—

Based on these characteristics, Donghua Material Science has worked with customers in the composite field to develop a variety of high-temperature-resistant formulation solutions, applicable to pultrusion, filament winding, VARIM and RTM processes.

ItemDE4067DE4069DE4070
Tg (DMA, °C)—251266
Tg (DSC, °C)189255279
Part A viscosity (25 °C, cP)3,6055,4005,400
Part B viscosity (25 °C, cP)125150155
Mixed viscosity (25 °C, cP)532735668
Pot life (25 °C, h)5> 24≥ 24
Gel time (150 °C)13'20"14'45"52'
Tensile85 MPa / 3,000 MPa / 4.50%68 MPa / 3,032 MPa / 2.57%79.1 MPa / 3,300 MPa / 2.80%
Flexural132 MPa / 2,900 MPa119 MPa / 3,030 MPa117 MPa / 3,190 MPa

A few values blurred in the original infographic are marked “—”.

Donghua Material Science is always committed to turning green solutions into practical results that customers can adopt and the market can promote. The expo ran until September 3 — colleagues from all sectors were sincerely invited to visit Booth 8Y35 for exchanges and cooperation, working together to promote the innovative development of the composite materials industry!